Wire Binding Equipment

This new wire binding machine is capable of handling both the common 3 holes per inch double loop wire and the 2 hole per inch wire which must be used for books thicker than 110 pages (9/16 in., 14mm). It is an excellent value for customers who have low to medium volume (50-100 books per week) and need the capability of doing both regular and larger wire binding.

For occasional use at home or office. Punches 7 sheets per bite, square holes. Attractive ivory color. Handy paper insertion bar/holder. Available in 3:1 (3 holes per inch) format only. 3 month warranty. Caution: This is a light-duty machine and will break easily if abused. However, if carefully used, it will give many years of service.

Offiwire For light duty use by a small office or department. Punches 10 sheets per bite. Strong metal construction and hardened steel punching dies for long life. Wire selector supplied to determine precise wire diameter for your book. Attractive green and white design. Punches square holes. One year warranty. Available in either 3 holes per inch or 2 holes per inch formats.

Heavy-duty electric punch for 3 holes-per-inch wire binding format. Foot-pedal operated. Attractive grey/silver finish. Punch capacity of 20 sheets, disengageable punches, variable punch depth gauge, 14 " punch width, user-friendly closing depth guide. Compact, space-saving design. Designed for documents up to 9/16 inches thick (110 sheets of photocopier paper). /

In Stock

A strong well made machine. Features square holes, margin adjustment, disengagable punches, easy horizontal squeezing mechanism, wire comb holder, one year warranty. Available in either 3 holes per inch or 2 holes per inch configuration. The best manual machine value on the market.

3 way punch binding system. This unusual machine is capable of doing both cerlox wire and Wire punching and binding. As well as plastic cerlox comb binding. Unique among these machines, it can do a credible job of unbinding wire elements. Which can then usually be reused. The machine is designed for low volume use in a small office.

When hangars are used a thumb cut must be made at the top of each page so that the hangar does not interfere with turning the pages. This die works on the R-39 Round Corner Machine shown in the Paper Trimmer Section. Back stop, if required is $25.00.